INVT Goodrive300-01A Series Operation Manual page 41

Goodrive300-01A series VFD for air compressor
Function
Name
code
P01 group Start and stop control
Function
Name
code
Starting frequency of
P01.01
direct startup
P01.08 Stop mode selection
P01.15 Stop speed
Stop speed detection
P01.16
Feedback speed
P01.17
detection time
P01.23 Start delay
P02 group Motor 1 parameters
Function
Name
code
P02.00 Type of motor 1
P02.01 Rated power of AM 1 0.1–3000.0kW
Rated frequency of AM
P02.02
Plot controller)
4: Start/stop the VFD with one click in terminal
mode (compatible with the Plot controller)
5–6: Reserved
7: Customer 1 parameter 1
8: Customer 1 parameter 2
9: Customer 2 parameter
10: Customer 3 parameter
Note: Though restoring to default values is
enabled, the motor parameters in P02 group
remain unchanged; P05.38, P05.40, P05.48,
P05.50, P18.04, P18.28, P18.29, P18.32,
P18.33, P18.38, P21.04, P21.05, and P21.06
also remain unchanged.
0.00–50.00Hz
0: Decelerate to stop
1: Coast to stop
0.00–100.00Hz
0: Detect as per the set speed value (judge
the ramps frequency)
mode 1: Detect as per the speed feedback value
(valid for vector control only)
0.00–100.00 s (valid only when P01.16=1)
0.0–60.0 s
0: AM
1: SM
0.01Hz–P00.03 (max. frequency)
1
Description
Description
Description
-36-
Function code description
Default Modify
Default Modify
◎
0.50Hz
○
0
◎
0.50Hz
◎
1
◎
0.50s
○
0.0s
Default Modify
◎
0
Depend
◎
on model
◎
50.00Hz