INVT Goodrive300-01A Series Operation Manual page 126

Goodrive300-01A series VFD for air compressor
B.1.4.7 Maintenance parameter interface
1. Enter the maintenance parameter interface through the main menu.
Maintenance
parameter
Air filter set time
Oil filter set time
Splitter set time
Lubricate oil set
time
Grease set time
03.17 16:02:35 Maintain param
Air filter set time
Oil filter set time
Splitter set time
Lubricat Oil set time
Grease set time
Air filter run time
Return
03.17 16:02:35 Maintain param
Grease set time
Air filter run time
Oil filter run time
Splitter run time
Lubricat Oil run time
Grease run time
Return
Figure B-21 Maintenance parameter interface
Initial
value
If the accumulative air filter use time exceeds this value, a
0 pre-alarm is displayed. If this value is set to 0, no pre-alarm
is displayed.
If the accumulative oil filter use time exceeds this value, a
0 pre-alarm is displayed. If this value is set to 0, no pre-alarm
is displayed.
If the accumulative splitter use time exceeds this value, a
0 pre-alarm is displayed. If this value is set to 0, no pre-alarm
is displayed.
If the accumulative lubrication oil use time exceeds this
0 value, a pre-alarm is displayed. If this value is set to 0, no
pre-alarm is displayed.
If the accumulative grease use time exceeds this value, a
0 pre-alarm is displayed. If this value is set to 0, no pre-alarm
is displayed.
xxxxxx h
xxxxxx h
xxxxxx h
xxxxxx h
xxxxxx h
xxxxxx h
Home
xxxxxx h
xxxxxx h
xxxxxx h
xxxxxx h
xxxxxx h
xxxxxx h
Home
Function
-121-
External optional accessories
Edit
Edit