Moving In The Menu And Changing Values; Figure 53: Moving Through The Menu And Values - Thermo Scientific RIIDEye X-G Installation, Operator And Technical Manual

Moving in the Menu and Changing Values

Run a Procedure/Display Information/Open Submenu
Check Option On or Off
Selection among Options / Adjust a Slider
Thermo Scientific

Figure 53: Moving through the menu and values

To quickly return to the tabs from somewhere in the middle of a menu, press the
M key. To select an item from the menu, press the U
ENU
the D arrow when on the tab to move to the first item on the menu. As a
OWN
shortcut, press the U
P
return from the menu system to the search mode, use the B
running a procedure or editing a specific item) or select the Exit item at the bottom
of each menu.
Perhaps the simplest type of menu item is one that runs a procedure, displays
information (such as a Help file), or opens a sub-menu. These all look the same on
the screen, except for the name of the menu item. To perform a task, simply move
the highlighted area (darker background) onto this menu item, and press E
a procedure, the first step of the procedure displays; for a Help menu item, the
associated help text displays.
A check-box allows you to change whether the option is enabled or not. Highlight
the menu item and either press E
check mark.
A few features, particularly Speaker Volume and Display Brightness, are set using
sliding adjustments. To change the value, highlight the item and press the L
to reduce the value or the R
percent and as a bar that goes from empty (0%) to full (100%). The small arrows
12/22/2016
arrow when on the tab to move to the last menu item. To
or use the L
NTER
arrow to increase it. The value is shown both as a
IGHT
or D arrow key. Press
P OWN
key (unless you are
ACK
and R arrows to toggle the
EFT IGHT
RIIDEye DB-099E Operator Manual
5
. For
NTER
arrow
EFT
53