WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
Pos : 51 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Bedienel emente/F el dbus koppl er/-contr oller/Speicher karten-Stec kpl atz - Übersc hrift 3 und Besc hreibung @ 9\mod_1286366340882_21.doc @ 65430 @ 344 @ 1
3.4.1
Memory Card Slot
The memory card slot accommodates a secure digital memory card (or SD card
for short) or an SD card with a higher storage capacity (SD high capacity, or
SDHC for short).
The memory card slot has a transparent protective flap that is folded upwards to
open it.
Memory card is not included in the scope of delivery!
Note, the fieldbus controller is delivered without memory card.
To use a memory card, you must order one separately. The fieldbus controller can
also be operated without memory card expansion, the use of a memory card is
optional.
Only use recommended memory cards!
Use only the SD memory card available from WAGO (order no. 758-879/000-
001) since it is suitable for industrial applications under difficult environmental
conditions and for use in the fieldbus controller.
The compatibility to other storage media available in trade cannot be ensured.
Additional information about the memory card
For technical information about the memory card, see the data sheet for the SD
memory card (order no. 758-879/000-001).
The data sheet is on the Internet at:
www.wago.com
Figure 64: Opening the memory card slot, inserting the SD card
Quickstart Reference
Version 1.0.0
Service Documentation WAGO-I/O-SYSTEM 758
Quickstart Description
65