Forcing Digital Inputs And Outputs; Table 43 Input Options For Forcing For Each Pin Of A Port - WAGO 765-1205/100-000 Product Manual

765-1205/100-000
ð The new user is created and assigned the selected role.
Removing Users
To remove an existing user from the product's user administration, proceed as follows:
• Click the red square with the white "x" to the right of the user you want to remove.
ð The user is deleted.
The user root cannot be deleted, so the red deletion button is grayed out there.

10.3.1.4.8 Forcing Digital Inputs and Outputs

To access the forcing functionality for the digital inputs and outputs via the Webserver,
you must be logged in there with operator or administrator rights. To perform forcing, pro-
ceed as follows:
1. From the Webserver main menu (left), select the DIO Forcing menu item.
2. Check the Forcing enable box.
ð Unless another user is already accessing it, access to the forcing functionality is now
enabled. A table with checkboxes in some of its cells appears on the screen:
You have three options for each pin that supports the forcing function:
Option
Forcing – substitute value bit is set
(1)
Forcing – substitute value bit is
deleted (0)
No forcing for this pin
Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A
Figure 25: DIO Forcing Menu Item, "DIO Forcing" Screen (Example View)
Table 43: Input Options for Forcing for Each Pin of a Port
"Force" Checkbox
Checked
Checked
Not checked
Commissioning
"Set/Clr" Checkbox
Checked
Not checked
No meaning
75