Install The Battery In The Handset - Cisco 6800 Series Administration Manual

Hardware Installation
• Repeater installation:

Install the Battery in the Handset

The handset battery is shipped inside the handset, but there's a plastic tab over the battery contacts. You need
to remove the plastic tab.
Procedure
Step 1 On the back of the handset, turn the latch counterclockwise to unlock the back, lift the clip, and lift the cover
to remove the battery cover.
Step 2 Remove the battery from the handset.
• Automatic configuration: Sign in to the Administration Web Page, on page 42
Registration, on page 51
Add a Repeater, on page 52
Install the Battery in the Handset
Cisco IP DECT 6800 Series Administration Guide
and Start Handset
35