Cisco 6800 Series Administration Manual page 69

Phone Administration
• If you administer a small network, you can create a local directory as an XML file. This file contains
• If your organization already has a Lightweight Directory Access Protocol (LDAP) phone directory (for
Set Up a Text Central Directory
Before you begin
You create a text file for the directory. The text file is in the following format:
<name>,<number>
Where:
• <name> is the name of the user. The constraints to the name are:
• <number> is the phone number. The constraints to the number are:
Note
Don't put a space between the comma and the phone number, or the entry is discarded.
• Create a local directory text file and save in the folder Directory in the server. The base station
locates the file in this directory when it uses the http protocol.
more information than the text file in the first bullet.
Note
This type is currently not supported.
example, for desk phones), you can configure the same directory on the base station.
• Can be up to 23 characters long. Names longer than 23 characters are truncated.
• Can't contain a comma (,).
• Only uses these characters:
• A–Z
• a–z
• 0–9
• -
• '
• Can be up to 21 digits long (including +). If the number is longer than 21 digits, the entry is discarded
with no warning.
• Can only contain these characters: +0123456789
• Can't be a SIP URI.
Set Up a Text Central Directory
Cisco IP DECT 6800 Series Administration Guide
61