Cisco 6800 Series Administration Manual page 186

Handset Specifications
Specification
Power
Radio Frequency (RF) Bands
For detailed technical information about the base station, see the datasheet at:
https://www.cisco.com/c/en/us/products/collaboration-endpoints/ip-dect-6800-series-multiplatform-firmware/
datasheet-listing.html
Handset Specifications
The following table shows the physical and operating environment specifications for the handsets.
Table 74: Physical and Operating Specifications
Specification
Operating temperature
Operating relative humidity
Storage temperature
Storage relative humidity
Height
Cisco IP DECT 6800 Series Administration Guide
178
Value or Range
Power adapter for local power
Ethernet PoE (Ethernet adaptor for normal power); IEEE 802.3: Power
class 2 (3.84 – 6.49W)
Bands are set in the factory and cannot be changed by customers.
• 1880 - 1895 (Taiwan)
•
• 1880 – 1900 MHz (Australia and New Zealand – reduced power
22 dBM)
• 1880 – 1900 MHz (E.U. and APAC)
• 1910 – 1930 MHz (LATAM and Argentina)
• 1910 – 1920 MHz (Brazil and Uruguay)
• 1910 – 1920 MHz (Uruguay – reduced power 140 mW)
• 1910 – 1930 MHz (Chile – reduced power 22 dBM)
• 1920 – 1930 MHz (U.S. and Canada)
Value or Range
32° to 113°F (0° to 45°C)
10% to 90% (noncondensing)
14° to 140°F (–10° to 60°C)
10% to 95% (noncondensing)
6825 Handset: 4.6 in. (117 mm)
6825 Ruggedized Handset: 4.6 in. (117 mm)
6823 Handset: 4.82 in. (122 mm)
Technical Details