Cisco 6800 Series Administration Manual page 161

Maintenance
Before you begin
You need a TFTP, HTTP, or HTTPS server configured and active.
Configure the TFTP, HTTP, or HTTPS server timeout for at least 3 seconds.
Procedure
Step 1
Open the root folder of the TFTP, HTTP, or HTTPS server file system.
Step 2 Create a subdirectory. For example, Cisco.
What to do next
Set Up the Firmware Update Parameters, on page 153
Set Up the Firmware Update Parameters
Typically, you only do this task once.
Before you begin
Connect to the base station web page as described in
You need the IP address or fully-qualified directory name (FQDN) of the TFTP, HTTP, or HTTPS server.
Procedure
Step 1 Click Firmware Update.
Step 2 Enter the TFTP, HTTP, or HTTPS server IP address or FQDN into the Firmware update server address
field.
Step 3 Enter Cisco into the Firmware path field.
Step 4 Click Save/Start Update.
Download and Copy the Firmware Files to the TFTP, HTTP, or HTTPS Server
You access the Cisco Software Download page to get the firmware in zip files. The zip files contain these
firmware files:
• For the base station, the zip filename starts with:
• From Firmware Release 5.0, the zip filename for the repeater starts with IPDect-RPT-110 for Cisco
• IPDect-DBS110 for Cisco IP DECT 110 Single-Cell Base Station
• IPDect-DBS210 for Cisco IP DECT 210 Multi-Cell Base Station
IP DECT 110 Repeater.
Set Up the Firmware Update Parameters
Sign in to the Administration Web Page, on page
Cisco IP DECT 6800 Series Administration Guide
42.
153