Cisco 6800 Series Administration Manual page 151

Monitoring
Field
RSSI
Measured time [mm:ss]
Located
Beacon Settings
Receive Mode
Transmit Interval
Alarm Profiles
Profile 0 to 7
Alarm Type
Alarm Type check box
Shared Call Appearance Settings
Idx 1 to 8
Terminal Web Page Fields for Firmware Release V450 and V460
Contents Description
Read-only field
Displays the Received Signal Strength Indicator
(RSSI) for the connected base station or repeater.
Read-only field
Displays the time in minutes and seconds since the
battery and RSSI information was captured from the
handset.
Read-only field
Identifies the connected base station or repeater with
which the handset communicates.
Values: Admin view only
• Disabled (default) Reserved for future use.
• Enabled
Values: Admin view only
• Disabled (default) Reserved for future use.
• Enabled
Admin view only
Indicates the list of alarms.
Name of the alarm Admin view only
Indicates which alarm type is configured for the
particular profile. When no alarms are configured, the
field displays Not configured.
Check box (default Admin view only
unchecked)
Identifies the alarm type that is active on the handset.
Admin view only
Index of the extensions
Cisco IP DECT 6800 Series Administration Guide
143