Cisco 6800 Series Administration Manual page 94

Extensions Web Page Fields
Field
Terminal Type, FW Info
FWU Progress
Battery Level
RSSI
Cisco IP DECT 6800 Series Administration Guide
86
Contents Description
This field is read-only Identifies the handset model number and the firmware
version.
This field is read-only Identifies the firmware update (FWU) state:
This field is read-only This field is new for Firmware Release 4.7.
Displays a snapshot of the current charge level of the
handset battery.
To refresh the Battery Level, RSSI, and Meas. time
fields, click Refresh
box.
This field is read-only. This field is new for Firmware Release 4.7.
Displays a snapshot of the Received Signal Strength
Indicator (RSSI) for the connected base station or
repeater.
To refresh the Battery Level, RSSI, and Meas. time
fields, click Refresh
box.
• Off: Identifies that the sw version field is set to
0 in the Firmware Update page.
• Initializing: Identifies that the update process is
starting.
• X%: Identifies the progress of the download,
where X is the amount of progress (0–100).
• Verifying X%: Identifies that the firmware
verification is in progress before it is used.
• Waiting for charger: Identifies that the firmware
download is complete and the handset needs to
be put into the charger to install the new
firmware.
• Conn.term.wait: Identifies that the repeater
firmware update is complete and the repeater
reset is in progress.
• Complete: Identifies that the firmware update
is complete.
• Error: Identifies that the update was not
successful. Possible reasons included:
• File can't be found.
• File isn't valid.
to the left of the IPEI check
to the left of the IPEI check
Monitoring