Sign In To The Administration Web Page; Access The New Base Station Web Page. See Sign In To The Administration Web Page - Cisco 6800 Series Administration Manual

Sign in to the Administration Web Page

Procedure
Step 1
Press and hold Power/End
Step 2 Press Menu
Step 3
Enter *47*.
Sign in to the Administration Web Page
You use the base station web page to configure the base station and handsets.
Note
Contact your service provider to determine if you connect to the base station with HTTP or HTTPS. This
procedure assumes that you use HTTP.
The web page signs you out after five minutes of inactivity.
Before you begin
You need the IP address of the base station.
The base station needs to be connected to the network and the green LED lit.
Procedure
Step 1
Find the IP address of the base station with
Step 2 In a browser, enter the address of the base station.
Format:
http://<address>/main.html
where:
• address is the IPv4 address of the base station.
Example
http://xxx.xxx.xxx.xxx/main.html where xxx.xxx.xxx.xxx is the IPv4 address.
Step 3 Sign in to the base station as the administrator.
Note
Cisco IP DECT 6800 Series Administration Guide
42
until the screen turns on.
.
We strongly recommend that you change the default administrator and user password. For more
information, see Change the Web Page Administrator or User Password, on page
Find the Base Station IP Address, on page
Phone Administration
41.
57.