Cisco 6800 Series Administration Manual page 74

Configure Paging
You configure the priority for the incoming page from a specific group. The priority level ranges between 0
and 3. The priority level indicates:
• 0: The incoming page places the active call on hold. The call resumes after the page is played.
• 1: The incoming page and the active call play at the same time.
• 2: The incoming page alerts with a tone. The paging plays when the active call is put on hold or the call
ends.
• 3: The incoming page doesn't alert during an active call.
When multiple paging sessions occur, they are answered in chronological order. The active page must end to
answer the next page. When do not disturb (DND) is enabled, the phone ignores incoming page.
The audio codec is set to G.711u.
Before you begin
• Make sure that all the handsets in a paging group are in the same multicast network.
• Access the phone administration web page.
Procedure
Step 1 Click Management.
Step 2
Configure the Multiple Paging Group Parameters in
Enter a string to configure the phone to listen and initiate multicast paging. Each string can have a maximum
length of 128 characters. You can add a phone to up to 3 paging groups. Enter the script in this format:
pggrp:multicast-address:port;[name=xxxx;]num=yyy;[listen={yes|no}]];pri=n
Where,
•
multicast-address
•
port
0 and 65534, and have an equal value.
•
name=xxxx
characters.
•
num=yyy
•
listen={yes|no}
groups can listen. If the field isn't defined, the default value is
•
pri=n
See the example that follows the procedure.
Step 3
Click Save.
Cisco IP DECT 6800 Series Administration Guide
66
—Indicates the multicast IP address the base stations listen and receive the pages.
—Indicates the port to page. You use different ports for each paging group. Port must be between
(optional)—Indicates the name of the paging group. The maximum length of the name is 35
—Indicates a unique number to dial to access the paging group. The number is 3 or 4 digits.
—Indicates whether the phone listens on the page group. Only the first two enabled
—Indicates the priority level of the paging. Priority level ranges 0–3.
Management Web Page Fields, on page
.
no
Phone Administration
104.