Cisco 6800 Series Administration Manual page 180

Change the Debug Log Level
Step 2
Click Syslog.
Step 3 Click Clear.
Step 4
Click Syslog.
Step 5 Click Clear.
Step 6
Recreate the problem.
Step 7 Click Syslog.
Step 8
Click at the beginning of the log.
Step 9 Scroll to the end of the log, hold Shift and then click at the end of the log.
Step 10
Press Ctrl+C.
Step 11 Go to the text editor and click in the top of the file body.
Step 12 Press Ctrl+V.
Step 13 Save the file to a known location on your PC.
Name the file with the log type, date, and time. For example, syslog_20181212.txt.
Step 14 Click SIP Log.
Step 15
Click at the beginning of the log.
Step 16 Scroll to the end of the log, hold Shift and then click at the end of the log.
Step 17
Press Ctrl+C.
Step 18 Go to the text editor and click in the top of the file body.
Step 19
Press Ctrl+V.
Step 20 Save the file to a known location on your PC.
Name the file with the log type, date, and time. For example, siplog_20181212.txt.
Step 21 Use
Change the Debug Log Level
When you have problems with your system, detailed SIP logs and syslogs may help to identify the problem.
Use this procedure only when requested by your service provider. The amount of information gathered with
increased debug levels may degrade system performance.
Note After you get the required logs, make sure you return the debug level to Normal Operation.
For more information about the fields, see
Before you begin
Connect to the base station web page as described in
Cisco IP DECT 6800 Series Administration Guide
172
Change the Debug Log Level, on page 172 to change the debug level to Normal Operation.
Management Web Page Fields, on page
Sign in to the Administration Web Page, on page
Troubleshooting
104.
42.