Cisco 6800 Series Administration Manual page 22

Set Up the Cisco IP DECT 6800 Series (Workflow)
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Cisco IP DECT 6800 Series Administration Guide
14
Command or Action
Perform one of these tasks:
• Mount the Base Station or Repeater on
the Ceiling, on page 26
• Mount the Base Station or Repeater on a
Desk, on page 30
• Mount the Base Station or Repeater on
the Wall, on page 31
Sign in to the Administration Web Page, on
page 42
Configure the Base Station, on page 46
Set the Base Station Country, on page 47
Configure the Network Settings, on page 47
Add Handsets to the Base Station, on page 49
Assign Handsets to Users, on page 50
Start Handset Registration, on page 51
Connect the Handset to the Base Station, on
page 52
Verify the System Configuration, on page 150
(Optional) Perform a Site Survey, on page 144
Cisco IP DECT 6800 Series
Purpose
placement gives good coverage before you
permanently install the hardware.
For more information, see the Cisco IP DECT
Phone 6800 Series Deployment Guide.
Mount the base station in the desired location.
Connect to the base station web page from
your browser.
(Manual configuration only) Configure the
base station to communicate with the SIP
server for call processing.
(Manual configuration only) Configure the
country and time for the base station. The
country determines ringtones and in-band
tones. The country also helps with time setup.
The time is displayed on the handsets and in
the base station log files.
(Manual configuration only) Set up the
network so that you can make calls.
(Manual configuration only) Configure
handsets on the base station. You can set up
one handset or multiple handsets.
(Manual configuration only) In the multiple
handset setup scenario, assign handsets to
specific users.
Prepares the base station to expect the handsets
to register and complete the communication
loop.
Set up communication between the handset
and the base station.
Check that you can place calls.
Check that the base stations are correctly
placed for communication with the handsets.