Cisco 6800 Series Administration Manual page 59

Phone Administration
Procedure
Step 1
Click Extensions.
Step 2 Click the link in the Extension Info column for the handset for a specific user.
The IPEI link shows the null IPEI number FFFFFFFFFF.
Step 3 In the Terminal page, set the IPEI field to the IPEI for the user's new handset.
Step 4 Set the AC field.
Step 5 (Optional) Configure the other fields, as described in
Step 6 Click Save.
Step 7 (Optional) Repeat steps 3 to 7 to set up more handsets.
What to do next
Start Handset Registration, on page
Start Handset Registration
After you have one or more handsets configured on the base station, you tell the base station to start the
registration process. The base station waits to receive registration messages from the handsets to complete
the communication loop.
You can register all the handsets at the same time or register them one by one.
Before you begin
Connect to the base station web page as described in
The base station needs to be connected to the network and the green LED lit.
• Single handset configured: The handset must be configured as described in
• Multiple handsets configured: The handsets must be assigned to users as described in
Procedure
Step 1
In the Extensions page, check the check boxes beside the new handsets to be registered.
Step 2 Click Register Terminal.
Step 3 Check the check boxes for the handsets in the Extension column.
Step 4 Click Start SIP Registration(s).
Station, on page 49
to Users, on page 50
Terminal Web Page Fields, on page
51.
Sign in to the Administration Web Page, on page
Cisco IP DECT 6800 Series Administration Guide
Start Handset Registration
90.
42.
Add Handsets to the Base
Assign Handsets
51