Cisco 6800 Series Administration Manual page 163

Maintenance
Step 9
Access the TFTP, HTTP, or HTTPS server file system.
Step 10 If not available, create a Cisco directory.
Step 11
Open the Cisco directory.
Step 12
Copy the new base station firmware file to the Cisco folder.
Step 13
Copy the new repeater firmware file to the Cisco folder.
Step 14
Copy the new handset firmware file to the Cisco folder.
What to do next
Upgrade the Base Stations, on page 155
Upgrade the Handsets, on page 156
Upgrade the Base Stations
The Firmware filename is available in a new format from the Firmware Release 5.0. For example,
DBS-210-3PC.04-80-01-0001-02.fwu. You must enter the complete filename with the extension into the
upgrade page.
The filename of the Firmware versions earlier than 5.0 contains the version (v) and branch number (b). For
example, DBS-210_v0470_b0001.fwu is version 470 and branch 1. When you upgrade to Firmware versions
earlier than 5.0, you can enter the firmware version and branch number without the leading zeros.
Note You should upgrade the base station when it's inactive. All the active calls drop when the upgrade starts.
During the upgrade, the base station LED flashes in the order green, red, green, and amber. Don't power off
the base station while the LED flashes. The upgrade may take about 30 minutes to 1 hour to complete and
reboot the base station.
Note We recommend that you upgrade the base station first, then upgrade the handsets after the base station upgrade
completes.
Before you begin
Connect to the base station web page as described in
you have multiple base stations, you should sign into the primary base station.
You need to have completed
the Firmware Files to the TFTP, HTTP, or HTTPS Server, on page
Procedure
Step 1 Click Firmware Update.
Step 2
Enter the Firmware filename with the extension in the Firmware version field for the base station.
or Downgrade the Base Stations, on page 158
or Downgrade the Handsets , on page 159
Sign in to the Administration Web Page, on page
Set Up the Firmware Update Parameters, on page 153
Cisco IP DECT 6800 Series Administration Guide
Upgrade the Base Stations
and Download and Copy
153.
42. If
155