Hardware Installation; Installation Requirements - Cisco 6800 Series Administration Manual

Hardware Installation

•
•
•
•
•
•
•
•

Installation Requirements

The Cisco IP DECT 6800 Series is made up of the following hardware:
• 6825 Handset
• 6825 Ruggedized Handset
• 6823 Handset
• 110 Single-Cell Base Station
• 210 Multi-Cell Base Station
• 110 Repeater
Note The 110 Single-Cell Base Station can't be used in the multicell system.
Before you begin to set up the Cisco IP DECT 6800 Series system:
• Determine the number of users (handsets) that are required.
• Determine the number of phone lines (numbers) that are required. Each user can have up to 2 lines and
• Given the number of handsets, determine the number of base stations required, based on:
Installation Requirements, on page 19
Install the Base Station, on page 25
Mount the Base Station or Repeater on the Ceiling, on page 26
Mount the Base Station or Repeater on a Desk, on page 30
Mount the Base Station or Repeater on the Wall, on page 31
Install the Battery in the Handset, on page 35
Set Up the Charging Cradle, on page 38
Charge the Handset Battery, on page 38
2 concurrent calls, if the supported total number of concurrent calls on the system aren't reached.
2
C H A P T E R
Cisco IP DECT 6800 Series Administration Guide
19