Cisco 6800 Series Administration Manual page 93

Monitoring
Table 8: General Section
Field
AC
Table 9: Extensions Section
Field
Idx
Extension, Info
Terminal Position
Terminal State
Contents Description
4-digit numerical code Identifies the access code (AC) for the base station.
This field can only be changed in admin view.
Contents Description
This field is read-only. Identifies the index of the handset.
This field is read-only. Indicates the International Portable Equipment
Identity (IPEI), the unique DECT identification
number for the handset.
This field is a link to further information about the
handset in the Terminal page.
Below the IPEI link is the status of the handset and
the extension.
The handset can appear in the list twice if it has 2
lines assigned to it.
This field is read-only This field is new for Firmware Release 4.7.
Indicates RPN number and name of the base station.
This field is read-only Indicates the current status of the handset:
Cisco IP DECT 6800 Series Administration Guide
Extensions Web Page Fields
• Status: a colored dot indicates the status:
• Green: the handset is registered.
Red: the handset is removed.
• Extension: the name of the extension
• Present@RPNxx: Handset is connected to the
base station RPNxx.
• Detached: Handset is not connected (for
example, powered off or not registered).
• Located: Handset is configured to communicate
with a specific base station, but can't connect.
For example, this displays if the handset is
powered on but the base station is powered off.
• Removed: Handset has not connected to the base
station (out of sight) for a specific amount of
time, typically one hour.
85