Cisco 6800 Series Administration Manual page 134

Call Progress Tones Web Page Fields
Field
Block Caller Id On
Outgoing Calls Activate
Block Caller ID On
Outgoing Calls Deactivate
Block Anonymous
Incoming Calls Activate
Block Anonymous
Incoming Calls Deactivate
Do Not Disturb Activate
Do Not Disturb
Deactivate
Call Progress Tones Web Page Fields
These are the fields displayed on the Call Progress Tones web page of the base station.
Standard call progress tones differ by region. When you set the country for your system, this page displays
the default tones for your country.
Table 54: Call Progress Tones Section Fields
Field
Dial Tone
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Call Waiting Tone
Confirm Tone
Holding Tone
Cisco IP DECT 6800 Series Administration Guide
126
Code Description
Default: 67 Dial this star code to not send the caller ID on an
outgoing call.
Default: 68 Dial this star code to send the caller ID on an outgoing
call.
Default: 77 Dial this star code to block calls that don't have a
caller ID.
Default: 87 Dial this star code to all the phone to receive calls that
don't have a caller ID.
Default: 78 Dial this star code to stop calls ringing on the phone.
Default: 79 Dial this star code to allow calls to ring on the phone.
Description
Prompts the user to enter a phone number.
Alternative to the Dial Tone. It prompts the user to enter an external
phone number, as opposed to an internal extension. It is triggered by a
comma (,) character encountered in the dial plan.
Prompts the user to enter a call forwarding phone number.
Played when a 486 RSC is received for an outbound call.
Played when an outbound call has failed or after the far end hangs up
during an established call. Reorder Tone is played automatically when
Dial Tone or any of its alternatives times out.
Played when the phone receiver has been off hook after a period of time.
Played during an outbound call when the far end is ringing.
Played when a call is waiting.
Brief tone to notify the user that the last input value has been accepted.
Informs the local caller that the far end has placed the call on hold.
Monitoring