Phone Setup; Adjust The Handset Rest - Cisco 8851NR User Manual

Hide thumbs Also See for 8851NR:
Table of Contents

Advertisement

CISCO 8800 SERIES
Revision
Added Connect to a Pre-Configured Wi-Fi Network
New Information for Firmware Release 11.0
The following table describes changes to this book to support Firmware Release 11.0.
Table 9: Cisco IP Phone 8800 User Guide revisions for Firmware Release 11.0.
Revision
Removed references to specific font size.
Updated the following section for improved Barge
and Merge support.
Revised the following section for the improved
Problem Report Tool support.
Added new icon to the following section for Do Not
Disturb(DND).
Updated the following section for Welcome screen.

Phone Setup

Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.

Adjust the Handset Rest

If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
GoMomentum.com
Updated Section
Connect to a Preconfigured Wi-Fi
Network
Updated Section
Change the Font Size
Add Yourself to a Call on a Shared Line
Report All Phone Issues
Turn On Do Not Disturb
Connect to Expressway
6
USER GUIDE
888.538.3690

Advertisement

Table of Contents
loading

This manual is also suitable for:

88118841884588518800 series8861 ... Show all

Table of Contents