Cisco 6800 Series Administration Manual page 191

Worksheets
•
Worksheets
You may find these worksheets useful when you gather the information you need to configure your system.
You can print this chapter if you need a paper record. You could also set up a spreadsheet or document and
recreate the worksheets for an electronic record.
Server Configuration Parameters Worksheet
The following table contains the mandatory information you need to configure the base station. You can use
the Data column to gather your information if you print the chapter.
Field name
Registrar
Outbound proxy
Time Server
MAC address of the
base station
IP address of the
base station
MAC address of the
second base station
Worksheets, on page 183
Description
The IP address or FQDN of the call control
system.
Session Border Controller or SIP server
outbound proxy.
The IP address or FQDN of the network
time server.
The MAC address is on the label under the
LAN port and also on the cardboard box
that contained the base station.
When the base station is plugged in, it uses
DHCP to get an IP address. You can get
the IP address of the base station with this
task: Find the Base Station IP Address, on
page 41
The MAC address is on the label under the
LAN port and also on the cardboard box
that contained the base station.
B
A P P E N D I X
Data
Cisco IP DECT 6800 Series Administration Guide
183