Base Station And Repeater Identification - Cisco 6800 Series Administration Manual

Cisco IP DECT 6800 Series
This document discusses the installation, configuration, and administration of the system. For information
about using the handset, see the Cisco IP DECT 6800 Series User Guide.
The following table lists some common terms and their meanings used in this document.
Table 1: Terms
Term
Handset or phone
Base station
Repeater
System
Note
Not all features may be supported on your system. Contact your service provider for the supported features.

Base Station and Repeater Identification

You can identify the Cisco IP DECT 6800 Series devices by the symbol on the top of the device.
Device
110 Single-Cell Base Station
210 Multi-Cell Base Station
110 Repeater
You can also identify the base stations and repeaters in these ways:
• The product identification label on the back of the devices.
• Repeaters don't have a LAN port.
Meaning
6823 Handset
6825 Handset
6825 Ruggedized Handset
110 Single-Cell Base Station
210 Multi-Cell Base Station
110 Repeater
The set of handsets, repeaters, and base stations at a customer site.
Symbols
Cisco IP DECT 6800 Series Administration Guide
Base Station and Repeater Identification
3