Cisco 6800 Series Administration Manual page 65

Phone Administration
Procedure
Step 1
Click Servers.
Step 2 In the Media Security field, select Enabled.
Step 3
In the Media Security only for TLS field, select Enabled.
Step 4 In the Secure RTP field, select Auto.
Step 5
Click Save.
Change the Web Page Administrator or User Password
We recommend that you change the administrator and user password when you set up the system.
You can change the administrator or user password in the Security web page or in the configuration file
(.xml).
Change the password this way in the configuration file (.xml).
• Administrator password:
• User password:
Before you begin
Connect to the base station web page as described in
Procedure
Step 1
Click Security.
Step 2 In the Password section, set the password fields.
For information on field requirements, see
Step 3
Click Save.
Set a Password Rule
You can define the minimum password length and restrict the use of ASCII characters in the password in the
Security web page or the configuration file (.xml).
The default password length is 4 and maximum is 127.
<Admin_Password>xxxxxxxx</Admin_Password>
Where, is the new admin password.
xxxxxxxx
<User_Password>xxxxxxxx</User_Password>
Where, is the new user password.
xxxxxxxx
Change the Web Page Administrator or User Password
Sign in to the Administration Web Page, on page 42
Security Web Page Fields, on page
Cisco IP DECT 6800 Series Administration Guide
112.
57