Cisco 6800 Series Administration Manual page 28

Installation Requirements
• Estimated simultaneous handset usage: For more information, see
• Size of the space covered.
• Range of the base stations. Each base station has a range of up to 984 feet (300 meters) outdoors
• If required, you can add repeaters to the base station to extend the range of the system:
For more information to determine the number of base stations, repeaters and handsets for the coverage
area, see Cisco IP DECT Phone 6800 Series Deployment Guide.
• The call control system must be set up and operational. Obtain the call control system information,
including server addresses, user ids, and passwords. You may find
you collect the information.
• Plan the location to install each base station.
• Determine if you need to mount the base stations on walls or on the ceiling.
• Ensure that there's a LAN connection close to the planned location of each base station. The Ethernet
• If you don't use Power over Ethernet (PoE), install the base station near the electrical outlet located
• Determine that the base stations are placed so that handsets can communicate. Make sure that the
• If repeaters are required:
• Determine if you need to mount the repeaters on walls or on the ceiling.
Cisco IP DECT 6800 Series Administration Guide
20
21.
and a range of 164 feet (50 meters) indoors.
Table 3: Maximum Number of Repeaters for the Base Stations
Base Stations
110 Single-Cell Base Station
210 Multi-Cell Base Station
Range of the repeaters. Each repeater has a range of up to 984 feet (300 meters) outdoors and a
range of 164 feet (50 meters) indoors.
We provide wall plugs and screws to mount the base station on drywall (plasterboard).
cable included with the base is 78.5 inches (200 cm) but you can use up to 3937 inches (10,000 cm)
length of straight-through CAT5e cable.
in an area that provides a good coverage for the base station. The length of the power cord with the
adapter is 82 inches (208 cm).
coverage is optimal for your users.
With the 110 Single-Cell Base Station, you can add repeaters to improve the coverage.
With the 210 Multi-Cell Base Station, you can add additional base stations or repeaters to improve
coverage.
We provide wall plugs and screws to mount the repeater on drywall (plasterboard). See the mounting
procedures for further information.
Handset Registrations, on page
Repeaters
6
3
Worksheets, on page 183
Hardware Installation
useful when