Install The Battery In The Handset - Cisco IP DECT 6800Series User Manual

Install the Battery in the Handset

Related Topics
Install the Battery in the Handset
The handset battery is shipped inside the handset, but there's a plastic tab over the battery contacts. You need
to remove the plastic tab.
Procedure
Step 1 On the back of the handset, turn the latch counterclockwise to unlock the back, lift the clip, and lift the cover
to remove the battery cover.
Step 2 Remove the battery from the handset.
Cisco IP DECT 6800 Series User Guide
22
Install the Battery in the Handset, on page 22
Handset Battery Charging, on page 27
Remove the Handset Clip, on page 25
Handset Setup