Cisco 6800 Series Administration Manual page 129

Monitoring
Table 48: Settings for this Unit Section Fields
Field
Multi cell system
System chain ID
Synchronization time (s)
Data Sync
Contents Description
Values: Indicates if the base station is part of a multicell
configuration.
• Disabled (default)
If you change this field, you must press Save and
• Enabled
Reboot.
512 (default) Identifies the multi cell chain. Each base station in
the chain uses the same ID.
Up to 5 digits
Note
Values: Indicated the period in seconds between
synchronization requests by the base stations in the
• 30
chain.
• 60 (default)
• 90
• 120
• 150
• 180
• 240
• 270
• 300
Values: Indicates the type of data synchronization.
• Multicast (default)
• Peer-to-peer
Cisco IP DECT 6800 Series Administration Guide
Multi Cell Web Page Fields
We recommend that you do not use a chain
ID that is similar to an extension number.
• Multicast—requires Multicast/IGMP to be
enabled on the call control system.
• The multicast port range and IP addresses
used is calculated from the chain id.
• The multicast feature uses the port range:
49200 to 49999
• The multicast feature IP range: 224.1.0.0 to
225.1.0.0
• Multicast uses UDP.
• Peer-to-peer—Use this mode when the network
doesn't allow Multicast. See
Page Fields, on page 124.
LAN Sync Web
121