Cisco 6800 Series Administration Manual page 117

Monitoring
The Multiple Paging Group Parameters section is new in Firmware Release 4.8.
Table 28: Multiple Paging Group Parameters
Field
Group 1-3 Paging Script
Firmware Update Web Page Fields
These are the fields displayed on the Firmware Update web page of the base station.
Note We recommend that you update the base station first, then update the handsets after the base station update
completes.
Table 29: Firmware Update Web Page Fields
Field
Firmware update server
address
Firmware path
Enable legacy firmware
naming
Type
Required version
Contents Description
String up to 128 For more information, see
characters 65
Contents Description
IP address or URL Indicates the location of the update server (TFTP
server address).
String Indicates the path on the update server where the
firmware update files are stored.
For example, set this field to Cisco.
Check box This field is new in Firmware release 5.0.
Default: unchecked Identifies Firmware downgrade to latest branch of
Firmware version 4.8(1) SR1.
Update Base Stations Indicates the hardware:
6825 Update Base Stations: Displays to update the base
stations.
6823
6825: Displays when the 6825 Handset is configured.
RPT-110-3PC
6823: Displays when the 6823 Handset is configured.
RPT-110-3PC: Displays when the 110 Repeater is
configured.
8-character string Indicates the firmware version to be updated. When
the field contains zero (0), the firmware upgrade is
disabled.
When you update this field, the version number
doesn't require the leading zeros. That is, if the version
is "v0445", you can input the version as 445.
Cisco IP DECT 6800 Series Administration Guide
Firmware Update Web Page Fields
Configure Paging, on page
109