Cisco 6800 Series Administration Manual page 145

Monitoring
Each page has information to help you understand how your system is being used and helps you identify
problems early.
Base Station
These are the fields displayed on the Base stations link of the Diagnostics web page of the base station.
Table 67: Base Stations Web Page Fields
Field
Base Station Name
Active DECT Ext
(Mm/Ciss/CcOut/CcIn)
Active DECT Rep
(Mm/Ciss/CcOut/CcIn)
Active RTP
(Lcl/Rx BC)
Active Relay RTP
(Lcl/Remote)
Latency [ms]
(Avg.Min/Average/Avg.Max)
Description
Indicates the IP address and name of the base station from the
management settings. The last row of the table contains the sum of all
the preceding rows in the table. If there is only one base station in the
system, then only the summary (Sum) row displays.
Indicates the number of active connections to extensions in the base
station.
• Mm—Mobility Management
• Ciss—Call Independent Supplementary Service
• CcOut—Call Control Out
• CcIn—Call Control In
Indicates the number of connections to repeaters in the base station.
• Mm—Mobility Management
• Ciss—Call Independent Supplementary Service
• CcOut—Call Control Out
• CcIn—Call Control In
Indicates the number of active RTP streams in use.
• Lcl—local RTP stream
• Rx BC—broadcast receive RTP stream
Indicates the number of active relay streams.
• Lcl—Local RTP relay stream
• Remote—remove RTP relay stream
Indicates the latency of ping between the base station.
• Avg.Min—average minimum delay
• Average—average delay
• Avg.Max—average maximum delay
Cisco IP DECT 6800 Series Administration Guide
Diagnostics Web Page Fields
137