Cisco 6800 Series Administration Manual page 66

Set Up the Web Server for HTTP or HTTPS
You configure the feature this way in the configuration file (.xml):
<Web_Min_Pass_Len>4</Web_Min_Pass_Len>
<Web_Pass_Constraint_To_Ascii>0</ Web_Pass_Constraint_To_Ascii>
Before you begin
Connect to the base station web page as described in
Procedure
Step 1 Click Security.
Step 2
In the Web password constraints section, set these fields:
• Minimum length (min 1): Enter the value for the minimum password length.
• Only ASCII characters: Select Yes to restrict the use of characters in the password.
Step 3 Click Save.
Set Up the Web Server for HTTP or HTTPS
To make your base station more secure, you can set it up to communicate with HTTPS only. The default is
to allow HTTP or HTTPS.
Before you begin
Connect to the base station web page as described in
Procedure
Step 1 Click Security.
Step 2
In the Secure Web Server section, enable or disable the requirement for HTTPS.
For information on field requirements, see
Step 3 Click Save and Reboot.
Cisco Product Security Overview
This product contains cryptographic features and is subject to U.S. and local country laws that govern import,
export, transfer, and use. Delivery of Cisco cryptographic products does not imply third-party authority to
import, export, distribute, or use encryption. Importers, exporters, distributors, and users are responsible for
compliance with U.S. and local country laws. By using this product, you agree to comply with applicable
laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
Cisco IP DECT 6800 Series Administration Guide
58
Sign in to the Administration Web Page, on page
Sign in to the Administration Web Page, on page 42
Security Web Page Fields, on page
Phone Administration
42.
112.