Cisco 6800 Series Administration Manual page 131

Monitoring
Field
Auto configure DECT
sync source tree
Allow multi primary
Auto create multi primary
Table 50: Base station settings
Field
Number of SIP accounts
before distributed load
SIP Server support for
multiple registrations per
account
System combination
(Number of base
stations/Repeaters per
base station
Table 51: Base Station Group
Field
ID
RPN
Version
Contents Description
Values Controls the ability to synchronize the multicell
system.
• Disabled
• Enabled (default)
Values: Allows the setup of systems in multiple locations.
• Disabled (default)
• Enabled
Values:
• Disabled (default)
• Enabled
Contents Description
Values
• Disabled (default)
• Enabled
Contents Description
A read-only index number.
Indicates the Radio Fixed Part Number (RPN) of the
base station. Each base station RPN is unique.
Indicates the firmware version.
Cisco IP DECT 6800 Series Administration Guide
Multi Cell Web Page Fields
• Disabled: If the original primary base station
can't be reached, the system continues without a
primary to sync to.
• Enabled: If the original primary base station can't
be reached, another base station takes over as the
primary base station.
123