Handset Registrations - Cisco 6800 Series Administration Manual

Hardware Installation

Handset Registrations

You can have up to 20 handsets registered on a 110 Single-Cell Base Station and 30 handsets registered on
a 210 Multi-Cell Base Station. However, the number of active calls the base station can handle is limited by
the codec.
Table 4: Number of Active Calls Supported for one 110 Single-Cell Base Station and one 210 Multi-Cell Base Station
Band
Concurrent Narrowband
Concurrent Secure Narrowband
Wideband
Table 5: Number of Active Calls Supported for two 110 Single-Cell Base Stations and two 210 Multi-Cell Base Stations
Band
Concurrent Narrowband
Concurrent Secure Narrowband
Wideband
Table 6: Maximum Number of Active Calls Supported for many 210 Multi-Cell Base Stations
Band
Concurrent Narrowband
Concurrent Secure Narrowband
Wideband
Note If a user turns on Push to Talk, the base station may reduce the supported number of active calls.
Note If you use repeaters, the base supports less active handsets.
• Ensure that there's an electrical outlet close to the planned location of each repeater. The length of
the power cord with the adapter is 82 inches (208 cm).
• Ensure that the repeater is within the range of the base station. Each base station has a range of up
to 984 feet (300 meters) outdoors and a range of 164 feet (50 meters) indoors.
110 Single-Cell Base Station
10
10
5
110 Single-Cell Base Station
20
20
10
Multicell System
2000
2000
1250
Cisco IP DECT 6800 Series Administration Guide
Handset Registrations
210 Multi-Cell Base Station
10
8
5
210 Multi-Cell Base Station
16
16
10
21