ENGINE / COOLING / EXHAUST
INTAKE MANIFOLD ADAPTER SERVICE
REMOVAL
Ensure the engine is clean and free of debris before
removing the manifold.
1. Remove the Intake Manifold. Refer to Intake Manifold
Service page 3.16.
2. Remove the four fasteners
w
manifold adapters
adapters.
INSTALLATION
1. Inspect the gasket surface on the adapters and
replace the adapter as needed.
3.18
CAUTION
q
securing the intake
to the engine and remove the
2. Install the intake manifold adapters
the engine using the four fasteners
specification.
TORQUE
Intake Manifold Adapter Fasteners:
7 ft-lbs (10 Nm)
3. Install the Intake Manifold. Refer to Intake Manifold
Service page 3.16.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
w
and secure to
q
. Torque to
© Copyright Polaris Inc.