Throttle Body Service - Polaris RANGER 1000 2020 Service Manual

THROTTLE BODY SERVICE

REMOVAL
1. Remove the intake duct to the throttle body. Refer to
Intake Duct Service page 3.12.
2. Disconnect the throttle body connector.
3. Remove the four fasteners securing the throttle body
to the engine and remove the throttle body.
INSTALLATION
1. Inspect the throttle body gasket and replace as
needed.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
ENGINE / COOLING / EXHAUST
2. Install the throttle body, gasket and four throttle body
fasteners and torque to specification.
TORQUE
Throttle Body Fasteners:
7 ft-lbs (10 Nm)
3. Install the throttle body connector.
4. Install the intake duct to the throttle body. Refer to
Intake Duct Service page 3.12.
5. Perform ETC learn procedure. Refer to ETC Learn
Procedure page 4.12.
3
3.15