Fuel Vent Line Routing (Evap Models) - Polaris RANGER 1000 2020 Service Manual

FUEL VENT LINE ROUTING (EVAP MODELS)

• The fuel tank is vented through an EVAP system.
r
• The vent line is routed from the fuel tank and into a Evaporative Emissions Canister
the Evaporative Emissions Canister
supported by the air intake duct in two places. The line connects to a Purge Valve
y
purge jumper line routes from the purge valve to the air intake manifold. This line assembly is secured to the
purge port on the manifold and to the purge valve using a quick connect fitting.
i
• The Fresh Air Lines are secured into a vertical section of the frame with a Vent Line Termination Fitting
runs through the Canister Filter
Image orientation is from the front passenger-side of the vehicle
NUMBER
q Evaporative Emissions Canister
w
Canister Filter
e Vent Line Termination Fitting
r Purge Line
Purge Valve
t
y Purge Jumper Line
u Purge Line Routing Clip
i
Fresh Air Lines
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
q
and is secured in a horizontal section of the frame
w
and into the Evaporative Emissions Canister
NOTICE
PART DESCRIPTION
FUEL SYSTEM
q
. The Purge line runs from
u
. The purge line is also
t
with a quick connect fitting. The
e
and
q
.
5
5.11