Maintenance Intervals - Polaris RANGER 1000 2020 Service Manual

Hide thumbs Also See for RANGER 1000 2020:

Table of Contents

MAINTENANCE INTERVALS

The maintenance interval charts outline required maintenance and inspection based on vehicle hours / miles. Each

table states the number of hours / miles that service is required on the vehicle. Some items or components may need

to be serviced more often due to severe use, such as operation in water or under severe loads. When the vehicle goes

beyond 500 hours / 5000 miles, return to the 25 hours / 250 mile chart and start the interval process over.

XU / D Brake Pads / Parking Brake Pads (INT'L) Inspect pad wear

XU / D Parking Brake Cable Adjustment (INT'L)

XU / E Engine Breather

Front Gearcase Lubricant

Transmission Lubricant (AGL)

XU / E Engine Oil & Filter Change (Break-In)

XU - Perform these procedures more often for vehicles subjected to severe use.

D - Have an authorized Polaris dealer perform these services.

E - Emission Control System Service (California)

25 HOUR / 250 MILE (400 KM) SERVICE

Turn key on to pressurize fuel pump; check lines / fittings for leaks and

Inspect; adjust tension after first 25 hours

Inspect; clean

Check terminals; clean; test

Initial fluid level inspection; add lubricant if needed

Perform a break-in oil and filter change at 25 hours or one month; perform

every 100 hours or 1 year after initial break-in oil change

9850045 R01 - 2020-2021 RANGER 1000 Service Manual

Table of Contents

Ranger 1000 2021