Rear A-Arm Service; Rear Upper A-Arm Removal - Polaris RANGER 1000 2020 Service Manual

STEERING / SUSPENSION

REAR A-ARM SERVICE

REAR UPPER A-ARM REMOVAL

1. Properly lift and support the vehicle by the frame.
2. Using a 13 mm socket, remove the four nuts retaining
the rear stabilizer bar to the frame.
q
3. Remove the nut from the lower portion of the
stabilizer bar link.
4. Remove the four wheel nuts and remove the wheel.
5. Remove the fastener
the rear shock to the lower A-arm.
9.20
w
retaining the lower portion of
6. Remove the fastener
A-arm to the bearing carrier.
r
7. Drill out the rivet retaining the brake line clamp to
the upper A-arm.
8. Using a 15 mm socket and open-end wrench, remove
t
the two fasteners retaining the upper A-arm to the
frame.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
e
and nut retaining the upper
© Copyright Polaris Inc.