Polaris RANGER 1000 2020 Service Manual page 353

INSTALLATION
1. Install the transmission in the vehicle and line up the
rear isolator mounting hole.
2. Loosely install the rear transmission isolator fastener
and nut.
TORQUE
Transmission Rear Isolator Fastener:
40 ft-lbs (54 Nm)
3. Loosen the two fasteners securing the transmission
mount bracket to the engine.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
4. Loosely install NEW engine to transmission mounting
w
fasteners and washers .
IMPORTANT
Do NOT torque at this time.
5. Loosely NEW engine to transmission mounting fas-
q
teners and washers on the PTO side of the engine.
IMPORTANT
Do NOT torque at this time.
TRANSMISSION
7
7.17