ENGINE / COOLING / EXHAUST
HEADPIPE SERVICE
REMOVAL
1. Remove the Oxygen Sensor. Refer to Oxygen Sensor
Service page 4.27
2. Remove the Exhaust Muffler. Refer to Muffler Service
page 3.20.
3. Remove the four fasteners
w
shield
to the headpipe, and remove the heat
shield.
4. Remove the two fasteners
r
shield
to the headpipe, and remove the heat
shield.
3.22
q
securing the upper heat
e
securing the lower heat
5. Remove the four fasteners
y
to the engine.
6. Disconnect the exhaust isolator from the chassis and
remove the headpipe from the vehicle.
NOTICE
Discard the headpipe gasket.
INSTALLATION
1. Install a new headpipe gasket.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
t
securing the headpipe
© Copyright Polaris Inc.