FINAL DRIVE
y
9. Install retaining ring
away from U-joint into exposed groove.
u
10. Place larger adapter
on side with retaining ring.
11. Tighten clamp until other cap is below retaining ring
groove.
12. Install second retaining ring
edge facing away from U-joint.
13. Verify the U-joint moves freely and does not bind.
8.18
with sharp, square edge facing
with ID larger than yoke bore
i
with sharp, square
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.