Rear Panel Removal / Installation - Polaris RANGER 1000 2020 Service Manual

5. For installation, reverse removal procedure. Torque
the fasteners to specification.
TORQUE
Roof Fasteners:
42 in-lbs (5 Nm)
TORQUE
Overhead Light Fasteners:
18 in lbs (2 Nm)
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
REAR PANEL REMOVAL /
INSTALLATION
NOTICE
Two people should work together to remove and install
the rear panel windshield.
1. Rotate the LOCK & RIDE handles counterclockwise
into the unlocked position
2. Rotate the top of the rear window slightly away from
the vehicle, then lift the windshield up and away from
the vehicle.
NOTICE
Store windshield in an upright position in a location
where it will not be bumped into and where it will not be
subject to things falling on it. Polaris recommends that
the lower frame of the glass be set onto a wood or other
semi-soft support structure to prevent unexpected
movement and potential breakage of the window during
storage.
3. Reverse the removal procedure for installation. Turn
the LOCK & RIDE handles clockwise to the locked
position to secure the windshield.
BODY / FRAME
11
11.65