ENGINE INTAKE PRE-FILTER SERVICE
It is recommended that the engine intake pre-filter be
inspected daily. The filter should be inspected using the
following procedure:
1. The engine intake pre-filter is located just above the
right rear wheel fender.
2. Inspect the pre-filter on the outboard
w
sides. If necessary, clean with soapy water and air
dry.
CAUTION
Compressed air or high pressure hose may damage the
frog skin pre-filter on the intake.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
AIR FILTER SERVICE
Inspect the air filter at the intervals outlined in the
Periodic Maintenance Chart. In extremely dusty
conditions, air filter replacement will be required more
often.
1. Remove seats.
q
2. Remove upper rear close off panel
and inboard
3. Disengage seven cover latches
4. Pull cover outward far enough to remove air filter
MAINTENANCE
2
q
.
w
.
e
.
2.21
Need help?
Do you have a question about the RZR PRO R and is the answer not in the manual?