OIL SUMP SERVICE
REMOVAL
1. Remove the skid plate. Refer to Skid Plate Service
page 11.35.
2. Drain the engine oil.
3. Remove the M8 fasteners
the engine.
4. Remove the thirteen M6 fasteners
sump to the engine.
5. Remove the oil sump from the engine.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
q
securing the oil sump to
w
securing the oil
ENGINE / COOLING / EXHAUST
INSTALLATION
1. Clean the gasket surface on the engine.
2. Clean the gasket surface on the oil sump and apply a
thin film of crankcase sealant (PN 2881416).
3. Install the thirteen M6 oil sump fasteners
torque to specification.
TORQUE
Oil Sump Fasteners (M6):
9 ft-lbs (12 Nm)
3
w
and
3.51