Steering Rack Removal; Steering Rack Installation - Polaris RANGER 1000 2020 Service Manual

STEERING / SUSPENSION

STEERING RACK REMOVAL

1. Remove the pinch bolt
e
of the steering shaft
q
.
r
2. Remove the nuts retaining the both tie rod ends to
the steering knuckle.
3. Remove the three fasteners
rack to the frame.
4. Remove Steering Rack from vehicle.
9.8
w
retaining the lower portion
to the steering rack assembly
t
retaining the steering

STEERING RACK INSTALLATION

1. Lay the old and new steering racks next to each other
on a clean surface. Measure the old steering rack
length from tie rod end to tie rod end. Turn the tie rod
ends in or out to adjust the new steering rack to this
measurement.
2. Install the new steering rack into the vehicle. Install
t
three nuts retaining the steering rack to the frame.
Torque to specification.
TORQUE
Steering Rack Mounting Nuts:
40 ft-lbs (54 Nm)
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.