ENGINE ELECTRICAL
3. Connect the ignition coil retention clip to the valve
cover.
4.22
IGNITION SYSTEM TESTING
The ignition coil can be tested by using an ohm meter.
Use the following illustration and specification table to
test the ignition coil resistance.
IGNITION COIL RESISTANCE READINGS
TEST
PIN CONNECTION
Between 1 & 2
Primary
Between 2 & 3
Secondary
Between High Tension
(PTO)
Lead Caps
Secondary
Between High Tension
(MAG)
Lead Caps
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
RESISTANCE
0.4 Ω
6.794k Ω ±
10%
7.239k Ω ±
10%
© Copyright Polaris Inc.