Polaris RANGER 1000 2020 Service Manual page 370

TRANSMISSION
6. Install the idler gear shaft assembly
t
assembly and shift shaft rail
the transmission housing as an assembly. Be sure
the shift forks are engaged into the engagement
dogs. Install the assembly into the transmission
housing, all at the same time.
NOTICE
Shift fork pins should be offset towards the input shaft
as shown above.
7.34
r
, gear cluster
y
and shift forks into
7. Inspect the shift drum for any damage or wear.
Inspect the splines of the shift drum.
u
8. Install the shift drum
Lift up on the shift shaft rail
assembly towards the shift drum to allow the shift fork
ends to be installed into the shift drum
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
into the transmission housing.
y
and move the rail
u
.
© Copyright Polaris Inc.