Polaris RANGER 1000 2020 Service Manual page 316

PVT SYSTEM
INSTALLATION
1. Remove any debris found in the clutch ducting before
reassembly.
2. Ensure the clutch cover seal is fully seated and
inspect for damage. Replace if necessary.
3. Install the cover in the vehicle and rotate counter
clockwise.
6.8
4. Lift the rear of the cover up to the a-arm while
simultaneously rotating away from the engine.
5. Lift the cover over the a-arm assembly and line up
with mounting holes.
6. Install the eight fasteners
cover to the vehicle. Torque the fasteners to
specification.
TORQUE
Clutch Cover Fasteners:
44 in-lbs (5 Nm)
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
q
to secure the clutch
© Copyright Polaris Inc.