Polaris RANGER 1000 2020 Service Manual page 136

MAINTENANCE
Inspect shift cable, clevis pins, and pivot bushings and
replace if worn or damaged.
1. Shift to High Gear, release the shifter. Measure the
distance between shifter and top side of the dash
opening.
2. Shift to Park, release the shifter. Measure the
distance between shifter and bottom side of the dash
opening.
NOTICE
For optimal shift cable adjustment, the gap
measurements in High and Park should be equal. This
will ensure the shifter will not contact the dash.
2.48
3. Locate the shift cable
well area.
q
4. Inspect shift cable , dust boot
e
pivot bushings , and mount
wear or damage. Replace if wear or damage is found.
5. Loosen the lower jam nut
the mount bracket to move the upper jam nut
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
q
through the right rear wheel
w
, clevis pin and
r
. Verify there is no
t
and pull the cable out of
y
© Copyright Polaris Inc.
.