Polaris RANGER 1000 2020 Service Manual page 169

3. Torque the intake manifold clamps
TORQUE
Intake Manifold Clamps:
17 in-lbs (2 Nm)
4. Torque the lower intake manifold fastener.
TORQUE
Lower Intake Manifold Fastener:
18 ft-lbs (24 Nm)
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
r
to specification. 5. Install the harness retention clips on the intake
manifold.
6. Connect the fuel injectors
tail light harness
7. Install the intake duct from the airbox to the throttle
body. Refer to Intake Duct Service page 3.12.
ENGINE / COOLING / EXHAUST
NOTICE
Replace cable ties if previously cut.
q
, T-MAP Sensor
e
.
3
w
and
3.17