PVT SYSTEM
7. Remove the seven inner clutch cover fasteners
and remove the inner clutch cover.
6.12
t
INSTALLATION
1. Inspect the seals on the engine and transmission
input shaft. Replace if necessary.
2. Install the inner clutch cover and the seven cover
t
fasteners
Inner Clutch Cover Fasteners:
3. Install the retention clips
cover and air duct
specification.
4. Connect the three retention clips
chassis harness and fuel line to the inner clutch
cover.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
. Torque to specification.
TORQUE
5 ft-lbs (7 Nm)
r
on the top of the clutch
e
. Torque the air duct clamp to
TORQUE
PVT Air Duct Clamp:
35 in-lbs (4 Nm)
q
to secure the
© Copyright Polaris Inc.